XM-5 OIL STABILIZER is a 100% petroleum lubricant: it is purely oil itself and contains no metal, graphite, wax or detergent additives.
As soon as mechanical movement takes place oil with XM-5 added rises to its highest point to instantly lubricate all moving parts of the engine. When normal engine heat has stabilized XM-5 returns to normal viscosity to await another cold start.
XM-5 helps reduce tappet noise, assists to eliminate destructive acids from gas and oil that cause varnish carbon and sludge to form. The difference in performance is quickly noticed.
The major cause of wear in all types of equipment is cold and dry starting. Dry starting results in metal to metal contact when you crank your engine because the oil, which has cooled and receded into the sump, lacks a stabilizer needed to immediately lubricate our pistons. Thus after thousands of kilometers of driving the cylinders are often pitted and scoured, and ominous clicking sounds remind you your engine isn’t all it used to be. Such excessive wear is needless and preventable if you eliminate metal to metal wear. XM-5 a 100 percent petroleum lubricant, will do just this and more.
Cars, trucks, tractors, boats. Should quieten engines and gear boxes. Keeps new cars new longer. Cleans and quietens hydraulic valves. Reduces heat, slip, grab and leaks in automatic transmissions. Quietens and smoothes trans, rear ends, gear and transfer cases. Increases rpm’s because of less friction and carbon build-up. Gives easier, faster and smoother shifts. Reduces blow-by, sludge and varnish for better results with smog control and P.V.C. systems. Stops oil dilution.
The efficiency of XM-5 Oil Stabilizer has been extensively tried and proven in trucking, industrial machinery, marine engines, tractors and farm equipment, mining and drilling equipment, and logging equipment. XM-5 reduces: heat, seal leakage, slippage in torque converters and hydraulic hoists, gear and bearing noise, and crankcase dilution.
- XM-5 seals the cylinder to stop oil from coming into the combustion chamber.
- XM-5 keeps the heat and contaminants of the combustion chamber from going into the oil, thus keeping the oil clean.
XM-5 OIL STABILIZER EMISSION TEST
XM-5 OIL STABILIZER ALSO ADDS LUBRICITY TO DIESEL FUEL.
The removal of sulfur, to get a low-sulfur fuel, is usually achieved by treating the fuel with hydrogen (hydrotreating) this also reduces the content of desirable, lubricity-enhancing chemicals, XM-5 Oil Stabilizer helps to replace this loss.
XM-5 OIL STABILIZER when mixed with diesel fuel helps dissolve the resins and gums holding the deposits in place. Deposits form on pistons, rings and valves, reducing the engine's ability to use fuel efficiently. These deposits cause an uneven and incomplete burn in the combustion area. This results in sticking rings and accelerated engine wear.
XM-5 OIL STABILIZER helps remove these deposits thus returning components to a more efficient state and allowing the engine to function properly.
Fuel injection systems are especially vulnerable to the negative effects created by unwanted deposits. The exacting tolerances required to maintain the proper amount and pattern of the injected fuel spray are affected by small amounts of these buildups.
XM-5 OIL STABILIZER helps remove these deposits from the injection system, maintaining proper fuel injection characteristics. The intent of XM-5 OIL STABILIZER is to help keep engines clean, utilizing fuel more efficiently, saving both money and energy.
Continued use of XM-5 OIL STABILIZER in your diesel fuel helps provide a constant film of lubrication and protection to the upper engine area. XM-5 OIL STABILIZER disperses and suspends throughout the fuel in a colloidal fashion. XM-5 OIL STABILIZER is carried into the engine with fuel, thereby lubricating the entire fuel system.
The role of XM-5 OIL STABILIZER is to coat the surfaces, decreasing metal to metal contact and reducing friction and increasing compression. XM-5's high fire point causes this film lubrication to remain on vital contact areas throughout the combustion process. Diesel engines depend on the heat created by compression to ignite the air/fuel mixture. XM-5, through its unique combination of temperate stability, tenacity to metal surfaces and low coefficient to friction, forms a film between pistons and cylinder walls, thus sealing the combustion chamber. Compression is increased, friction reduced and engine efficiency improved.
CYLINDERS AND INJECTORS OF HARMFUL DEPOSITS, PLUS LUBRICATE THE FUEL SYSTEM.
CLEANS CARBON DEPOSITS AND FIRING RESIDUE
ENCAPSULATES WATER, SALT, ETC THUS REDUCING RUST, ETC
COATS WORKINGS TO REDUCE FIRING RESIDUE ADHESION AND RUST
NON-TOXIC, FRIENDLY AND NON CORROSIVE
WILL NOT DRY OR EVAPORATE DURING STORAGE
EASILY WIPE AWAY DIRT AND CONTAMINANTS AND A FILM IS STILL LEFT BEHIND TO CONTINUE PROTECTION
XM-5 AIR TOOL OIL is especially engineered for the care of all piston-type and rotary air tools.
100% petroleum product.
Prevents rust formation even during storage.
Contains no metal, graphite, wax or detergent additives.
Has incredible clinging qualities, a fine film of oil stays on all moving parts it comes in contact with.
Provides positive lubrication for longer tool life and smoother starting.
Ensures maximum output and top performance by dissolving the gums and sludge’s that rob air tools of speed and power.
In most cases with automatic oilers the amount of air tool oil used can be reduced, thereby saving money.
Cushion seals all moving parts, preventing metal to metal contact.
Formulated to increase RPM’s and torque.
Has more staying power even in the presence of water by encapsulating the water.
The clinging quality will help eliminate the need to hammer your air tools to get them to start, unless badly worn.
XM-5 AIR TOOL OIL is designed to keep your new air tools like new, longer and your old air tools working like new longer.
Air Tool Oil is available thru distributors only.
Check us out under
Saskatchewan Industry & Resources
Order online or contact us.
Only $12.50 CAD per 500 ml bottle plus shipping ($6.50/bottle)
WE NO LONGER SHIP TO THE USA.
CANADIAN DELIVERIES ONLY.
($12.50 ea + $6.50/bottle freight)
($12.50 ea FREE shipping)
($4.99 + $6.50 freight)
For larger containers please check your local Lordco or UniSelect dealer (B.C. residents). Otherwise, please contact me.
My name is Jerry, and I developed XM-5.
If you have any questions or comments please contact me.
Box 938 Estevan, SK - S4A 2A7
Copyright © 2015 H.M.F. Oil Co. Ltd. | Designed & Powered by Nut-Nae Art